How To Reset Maintenance Light On Toyota Corolla? (All Years)
Maintenance lights divert attention while driving. In some circumstances, it is necessary to know how to reset the maintenance light on Toyota Corolla.
Start the car without engine ignition. In the older models, enable the “Trip A”. Then, with the help of the Trip Reset button on the odometer, you will be able to reset the maintenance light.
Go to the Scheduled Maintenance screen and select Reset on the new models of Toyota Corolla. This will turn off the maintenance light by resetting it.
There are some situations where it is ok to reset the maintenance light. But in others, it is obligatory to turn off the reset light after taking care of the malfunction.
When Should You Reset Maintenance Light on Toyota Corolla?
The maintenance light is the signal for malfunction in your car. But sometimes, the maintenance light can go through the malfunction itself. Then you will need to reset it manually.
Here are some situations when resetting the maintenance light on Toyota Corolla is necessary:
- False alarm
- Less but sufficient fuel available
- After maintenance is already done
- Postponing the maintenance schedule
These are the few cases when it is safe to rest the maintenance light. But in others, it is a must to take care of the malfunction to turn off the light.
Does Resetting Maintenance Light on Toyota Corolla Solve The Problem?
Before resetting the maintenance light on Toyota Corolla, you need to understand that the light is only an alarm for malfunctions. It is not the key to resolving malfunctions.
If the problems are with breaks, engine ignition, engine coordination, or more, it can cause accidents. It is an absolute necessity to resolve these problems as soon as possible.
Therefore, resetting the maintenance light will not solve the malfunction. Rather an unnecessary reset can cause severe damage to your car.
How To Reset Maintenance Light on Toyota Corolla?
Toyota Corolla is one of the most demanded cars that Toyota has ever produced. But the model has evolved over the years and produced multiple iterations.
Therefore, depending on the model of your car, the process of resetting the maintenance light on Toyota will vary.
The models between 2014 and 2018 have analog displays, whereas the models between 2019 and 2022 have a digital display.
Thus, the resetting procedure will also vary depending on which model you own.
Resetting Maintenance Light on Toyota Corolla 2014 – 2018
Resetting the maintenance light on Toyota Corolla between the 2014 – 2018 models is a bit technical. It is essential to follow the steps with delicacy.
Step 1: Turn On The Car
To begin with, you will need to insert the key into the key slot.
Now turn the key to the “On” position. But do not start the engine ignition. Make sure that the car is in hand brake and on neutral gear.
If you have started the ignition, turn the engine off and turn the key to the “On” position again. Otherwise, the resetting procedure will not be successful.
Step 2: Display “Trip A”
You will have to make sure that “Trip A” appears on your screen in this step.
On your car’s odometer or the steering wheel, you will see the button for “Trip reset”.
Press and hold the “Trip Reset” button. Hold it until “Trip A” appears on your screen. Trip A shows the travel distance in trip A.
Step 3: “Turn Off” And “Turn On” The Car
After “Trip A” appears on the screen, you will need to “Turn off” your car. Just turn the key in the anticlockwise direction.
Once the car is turned off properly, wait for a few seconds.
Now again, “Turn On” the vehicle. This time also make sure that you don’t start the engine ignition. Also, ensure that the car is in neutral gear.
Step 4: Reset
When the car is on “Turn On” mode, take a look on the screen and see if “Trip A” is visible on the screen or not.
Then again, press and hold the trip reset button if it is there. Hold it for a few seconds.
While holding the button, keep your eyes on the odometer. After a while, you will see that the miles counting on the odometer have turned to zero.
Flashing the miles to zero means it’s time to release the button. You will see that the maintenance light has turned off. That means the reset has been completed.
Resetting Maintenance Light on Toyota Corolla 2019 – 2022
If you own a Toyota Corolla of the recent model, resetting the Maintenance light will be pretty straightforward.
Here, you need to follow the digital screen without worrying about detailed technicality.
The following steps can help reset the maintenance light on your Toyota Corolla 2019 – 2022.
Step 1: Turn On The Car
In the recent model, the car is operated with a remote key. That means you don’t need to use a standard key.
With the remote key, turn on the car and put it in the “II” position. Now put your foot on the brake paddle. And press the push start button in your vehicle. It is just beside the steering wheel.
Press the start button two times in a row. Make sure not to ignite the engine.
Step 2: Going To The Menu
On the Turn On mode of your car, your Multipurpose digital screen will also turn on.
Now with the keys on the steering wheel, you will be able to operate the display menu. From there, go to the “Menu” option on the display.
Step 3: Locating Vehicle Setting on Menu
Find the setting icon once you locate the “Menu” on the screen. Pressing the left key or right key two or three times will take you to the Settings icon.
Under the setting icon, on the third or fourth option depending on the model of your car, you will find the “Vehicle Settings. Go to the option with the down key and press “ok” to select it.
Step 4: Reset
From the Vehicle Settings, select ” Scheduled Maintenance”. This will open the “Reset”. Select it and choose the ” Yes ” option. Once the reset is done, a message of “Reset Complete” will appear on the screen.
With this, the maintenance light will go off, and the reset will be completed.
The maintenance light is an important indicator of your car’s health. It notifies you of any malfunction in your vehicle.
But sometimes, it can be due to a false alarm or previously saved reading. You should know how to reset the maintenance light on Toyota Corolla in such cases.
But before turning off the maintenance light through resetting it, make sure that it is not indicating any serious problem.
It is always wise to consult an expert before resetting the maintenance light.